2 Ton Floor Jack Guide Buying Guide for 2017

About 2-Ton Floor Jacks

Any car owner who does his/her own maintenance work needs a floor jack. Floor jacks are a critical component of vehicle service work, as they allow you lift the car off of the ground to access the undercarriage. Floor jacks make tasks like changing a tire or doing an oil change infinitely easier. If you’re a home mechanic, a floor jack is an indispensable item. Floor jacks are constructed with a variety of materials including aluminum and steel and have a designated maximum load limit. Most automobiles require either a 2-ton or 3-ton capacity floor jack.

If you own a compact or mid-sized car, it’s important to find the right 2-ton floor jack to fit your needs. Not all floor jacks are the same, so you have to look at what will be best for you and your car. Larger vehicles require a 3-ton floor jack, but if you only plan on owning a smaller vehicle, you’ll do well with the 2-ton model. They are typically less expensive, lower weight, and easier to transport.

Factors to Consider

When comparing 2-ton floor jack models, take following factors into consideration:

  • Material – Floor jacks are composed of a variety of materials, including the lighter weight aluminum, and heavier cast iron and steel.
  • Portability – Depending on what the floor jack is made of, you’ll see a large range in terms of weight. Some floor jacks have caster wheels, providing an extra degree of maneuverability.
  • Storage – Especially for those with limited space, it’s important to consider how compact your floor jack is when not in use.
  • Lift height – 2-ton floor jacks all have a maximum lift height; some floor jacks cannot lift as high as others, so consider your personal needs.
  • Profile – Some floor jacks have a lower profile than others. If you have a car that sits lower to the ground, it’s critical to find the right floor jack capable of fitting underneath your vehicle.
  • Price – As with all purchases, the price is going to be a relevant factor. There is a wide range of pricing, so you’ll have to balance your needs in terms of specific features to your budget.


Top Picks:  Our Reviews

Arcan ALJ2T Aluminum Floor Jack

This 2-ton jack by Arcan is small but powerful. The jack has a maximum lift height of 19-1/4 inches and has a two-stage lift function to bring it to maximum height quickly. The ALJ2T is a great model for low profile vehicles, as it needs only 3-1/2 inches of clearance. You won’t have to worry about damage to your vehicle due to the rubber saddle pad on the top of the lift arm. The handle features a quick lock function, and you won’t feel a wobble while using it. The aluminum floor jack also has mounted swivel casters for increased maneuverability.


The body is constructed of sturdy aluminum, which makes this model lighter and more portable than comparable models. The ALJ2T weighs just under 50 pounds and is a compact 26-1/2 inches in length. The jack also features a side-mounted handle, making the jack easy to move and carry. Unfortunately, some consumers have reported that over time, the jack doesn’t perform as well as it does new, but Arcon does offer a limited warranty. Overall, the ALJ2T is a superior model designed with the need of the home mechanic in mind.




Hein-Werner OMEHW93642 Floor Jack

This floor jack model is durable and features a cast iron lift arm, making lifting heavy loads easier. The jack is fortified with flanged side plates, which strengthens the jack and provides additional support and has caster wheels for better maneuverability. This model has a lift height of 20 inches and can fit low-profile cars with a clearance of 3-3/4 inches. The hydraulic pump is tightly sealed, protecting the pump from contamination. The unit has an attractive blue and yellow color scheme and is a great choice for the home mechanic. However, the jack weighs 96 pounds, and some users report that the handle is difficult to remove.




Torin T82751 Pro Series Heavy Duty Floor Jack

This model by Torin is surprisingly strong for its size. The unit weighs 78 pounds but has the capacity to lift 2.75 tons, and includes a safety system designed to ensure you never lift beyond capacity. The body is a jolly red color, with a wider stance to provide extra support. Steel casters allow for 360 degrees of rotation for ultimate maneuverability. This jack by Torin is lightweight given its lift capacity and is an affordable price. According to some users, the jack does not reach the promised lift height of 19.3 inches. Overall, however, this is a very good floor jack model for the price.




Pro Lift F-767 Grey Low Profile Floor Jack

This floor jack model by Pro Lift is an affordable, compact model. The jack weighs only 30 pounds, and has a clearance of 3-1/2 inches, perfect for low-profile vehicles and for travel. The jack has a built-in safety valve that provides protection and assurance that you won’t overload the jack. The body of the F-767 is made of durable, long-lasting steel and is less than 18 inches in length, making it easy to store and carry. However, the jack has a shorter handle than other models, which increases the time it takes to raise the car; the handle only locks by twisting it in place, so it can come loose.




Arcan XL20 Black Low Profile Steel Service Jack

This floor jack model by Arcan fits low profile vehicles and features a dual pump for quick lifting and safety valve to prevent overloading. The compact unit weighs 67 pounds and has a maximum lift height of about 18 inches. The XL20 is a compact design and is lower in price than some comparable models. Arcan is a reputable brand known for producing high-performance, durable products. The jack is compatible with most vehicles and meets the 2009 ASME PALD industry-leading standards.